Steel pipe rolling groove machine operation guide
![](https://icdn.tradew.com/file/202402/1576146/jpg/8117576.jpg?x-oss-process=image/quality,Q_90)
Steel pipe grooving machine is a commonly used equipment in the field of pipeline installation, which is mainly used to groove steel pipe for pipeline connection. In order to ensure the operation safety and improve the working efficiency, this article will provide you with a detailed guide to the operation of steel pipe grooving machine, including safety operation regulations, operation techniques and other contents.
Safe Operating Procedures
Pre-operation preparation(1) Check whether the power cord, plug and socket of the equipment are intact, and ensure that the equipment is well grounded. (2) Check whether the parts of the equipment are intact and whether the screws and nuts are tight. (3) Wear personal protective equipment, such as labour gloves and protective glasses.
During operation (1) Before starting the equipment, make sure there is no debris around the equipment to avoid affecting the operation.(2) According to the specification of the steel pipe, adjust the position of the tool of the grooving machine to make sure that the tool and the steel pipe are close to each other.(3) During operation, it is strictly prohibited to put your hand inside the equipment to avoid accidents.(4) In the process of processing, if abnormalities are found, the machine should be stopped immediately for inspection and troubleshooting before continuing operation.(5) During operation, do not leave your post without permission to ensure the safe operation of the equipment.
After operation (1)Switch off the power supply of the equipment and clean the surface of the equipment and the workplace of oil, iron filings and other debris. (2) Carry out regular maintenance on the equipment to ensure good performance.
operating skill
Steel pipe selection (1) Choose steel pipes with uniform material, no cracks and no rust. (2) According to the actual demand, choose the appropriate steel pipe specifications.
Cutter Adjustment (1) According to the specification of the steel pipe, adjust the position of the tool to ensure that the tool fits closely with the steel pipe. (2) When the tool is badly worn, it should be replaced in time to ensure the processing quality.
Grooving speed control (1) Adjust the grooving speed according to the steel pipe material, specification and other factors. (2) Rolling groove speed is too fast, may lead to processing failure; rolling groove speed is too slow, will affect the work efficiency.
Processing quality inspection (1) Observe whether the rolling groove of steel pipe is smooth and even, and whether the groove depth meets the requirements.(2) Use professional gauge to check the groove depth, groove width and other dimensions to ensure the processing quality.
summaries
Mastering the operating procedures and skills of steel pipe rolling groove machine can not only improve work efficiency, but also ensure operational safety. In the actual operation process, the operator should strictly abide by the safety regulations, master the operation skills, and contribute to the cause of China's pipeline installation.